Floor Standing Cyclone Dust Collector Suppliers and Manufacturers

Floor Standing Cyclone Dust Collector Supplier Concentration and Factory Types

Floor standing cyclone dust collectors are sourced mainly from industrial equipment manufacturers in China, and the supplier results for this category point to Hebei as an active production base. The Hebei-based result is a combined-type company, meaning it operates as both manufacturer and trader, and lists dust collectors, screw conveyors, bucket elevators, drag chain conveyors, rotary valves, gate valves, filter bags and related handling equipment as main products. That breadth signals a workshop serving material-handling and air-filtration lines rather than a single-product specialist, which matters when you need matched accessories with the collector body.

A second cluster appears in Shanghai, where the listed supplier focuses on floor preparation machinery — concrete grinders, polishers, scrubbers and industrial vacuums — and offers a cyclone unit positioned as a pre-separator for concrete dust extraction. This is a different supplier archetype: a machinery brand adding cyclone separation to its floor-equipment ecosystem, often more suitable for jobsite-portable configurations than heavy industrial ducting. When no cluster is displayed for a given search, identify concentration yourself by filtering results by location and noting where verified manufacturers repeat across pages, then cross-check company type. Combined, manufacturer-only and trading companies all appear in this category, so read the supplier type label before assuming you are quoting a factory, and treat main-product lists as the fastest indicator of whether cyclone dust collection is a core line or a side item.

How to Verify Floor Standing Cyclone Dust Collector Suppliers

Verification starts with the platform signals already shown on the results page. One Hebei supplier in this category carries SGS verification, while the Shanghai supplier is verified by TUV Rheinland; these third-party audits confirm that a legal entity exists at the registered address and that stated business scope matches activity. Neither label certifies product quality, so treat them as a screening layer, not an approval. Note also that the Hebei result shows no system certification, which is common for smaller combined-type factories — it means you must request certificate copies directly rather than relying on the badge.

Verification continues with evidence the supplier controls directly. In this category, product listings display certification attributes such as ISO and CE on specific cyclone models, so ask for the actual certificates matching the model number quoted, not generic PDFs. One Shanghai listing states a machinery test report is provided, which is a concrete artifact to request before deposit. Practical steps: request the business license and check that "dust collector" or environmental equipment appears in scope; ask for photos or video of the cyclone welding and finishing line, since cone seam quality drives wear life; ask which models were tested and at what airflow; and confirm whether the quoted efficiency figure of 85-99 percent, as listed on several products here, applies to the particle size in your application. Finally, weigh response speed: one supplier here averages under six hours, another over twelve, and slow pre-sale replies usually worsen after payment.

What to Compare Across Floor Standing Cyclone Dust Collector Suppliers

Compare suppliers on the dimensions actually displayed, then fill gaps by asking. Lead time is a strong differentiator in this set: the Hebei combined supplier lists a 15-day lead time, which you should validate against your volume and whether the diameter you need — listed ranges run from roughly 1000 mm to 4100 mm — is a stocked size or a made-to-order shell. Response time gives a second operational signal; sub-six-hour replies versus half-day delays affect how quickly drawing changes and inspection questions get resolved during production.

Then compare product-level attributes, since these vary more than company labels. Across the listings here, cyclone collectors are offered in carbon steel with dry dust collection, horizontal installation, fully automatic or manual operation, airflows from about 750 m³/h up to 13500 cfm, and filtration medium choices spanning natural fiber and glassfiber on some models and metal fiber on the Shanghai pre-separator unit. Customization is marked available on multiple products, and ODM/OEM capacity appears on both suppliers, so compare their willingness to modify inlet geometry, outlet diameter or hopper design — not just color. Price bands differ sharply: listed figures range from roughly 200-800 USD for the compact Shanghai separator to 2000-50000 USD for Hebei industrial units, with MOQs as low as one or two pieces. Compare what sits inside each price band — diameter, steel thickness, motor inclusion — because headline prices are not comparable without specification sheets.

Common Floor Standing Cyclone Dust Collector Sourcing Risks

The most frequent risk in this category is specification drift: a supplier confirms "85-99 percent efficiency" from a listing, then the delivered unit performs at the low end because your dust is finer or lighter than the test dust. Cyclone efficiency depends heavily on particle size and density, and some listings here state granularity figures as fine as 1-3 microns or minimum particle sizes of 0.3 microns — claims you should require test evidence for, since centrifugal separators generally struggle in that range without a bag filter stage behind them.

A second risk is mismatch between supplier archetype and need. A floor-machinery supplier selling a cyclone as a vacuum pre-separator may not support flanged ducting connections, explosion vents or heavy-duty steel gauges that an industrial process requires; conversely, an industrial workshop may quote minimum sizes far above what a small workshop or jobsite needs. Watch for certification ambiguity: one model in these results carries ISO only while siblings carry ISO and CE, so confirm the exact certificate attached to your model number before shipping, especially for EU destinations. Trading-company layering is another hazard — combined-type suppliers can be either factory or agent depending on the product line, so ask who welds the cone. Finally, packing and installation assumptions cause disputes: some listings specify steel-frame packing, others wooden cases, and horizontal versus vertical installation affects freight volume and site preparation, so fix both in writing before deposit.

Floor Standing Cyclone Dust Collector Regional Sourcing and Logistics

Two regions dominate the current results, and they serve different logistics profiles. Hebei sits within northern China's heavy-industry belt, and suppliers there typically ship large carbon-steel cyclone bodies — diameters up to 4100 mm appear in the listings — either fully assembled or knocked down. At those sizes, ocean freight becomes the dominant cost variable: a fully welded unit wastes container space in the cone section, so ask whether the supplier can split the body, cone and hopper into bolted sections for containerized shipping, and what that does to site assembly labor. The Hebei supplier's listed 15-day lead time is workable for standard sizes, but confirm it resets for non-stock diameters.

Shanghai offers the opposite profile: proximity to one of the world's largest container ports, and products like the 78 kg pre-separator unit listed here — packed in a wooden case at 75×50×155 cm — that ship easily as LCL freight or even consolidated with other machinery. If you are buying a single separator alongside floor grinders or vacuums, sourcing from the same Shanghai supplier can cut consolidation cost. When your search returns no location data or unfamiliar regions, do not assume proximity to ports; check the registered address against major container hubs and ask for the nearest port and an FOB quote. Always request gross and net weight with packing dimensions for your exact configuration, since cyclone units quote dimensions that change materially with diameter and discharge options.

Floor Standing Cyclone Dust Collector Commercial Terms and Order Planning

Commercial terms in this category vary widely enough that you should build your own comparison sheet rather than accepting listing prices. Observed price bands here run from about 200-800 USD for the compact Shanghai pre-separator to roughly 2000-50000 USD for Hebei industrial cyclone units, with the mid-range listings around 4000-30000 USD, and MOQs of one or two pieces. Because cyclone collectors are commonly made to order by diameter, use the listed price as a negotiation anchor only — final quotes will move with steel thickness, motor inclusion, and whether you need rotary valves or screw conveyors attached to the discharge. A 30-50 percent deposit with balance before shipment is a common structure worth proposing.

Plan orders around the lead-time evidence available: 15 days from the Hebei supplier for confirmed specifications, but add buffer for drawing approval, welding inspection and booking during peak container seasons. Order planning should also cover spare and companion parts early — filter bags, rotary valves and gate valves appear in the main-product lists here, so bundling them into the first order simplifies one shipment and one customs entry. If payment risk concerns you, favor channels offering escrow or platform-protected payment and confirm which payment routes the supplier accepts; verification badges such as SGS or TUV Rheinland reduce, but do not eliminate, counterparty risk. Finally, confirm warranty scope in writing — one Shanghai listing states a one-year warranty — and define what parts and labor it covers before signing.