Arduino RGB LED Module Suppliers and Manufacturers in China

Compare 23 verified suppliers of Arduino RGB LED Module based on location, response time, lead time, and certifications. Review product specs like IP ratings and power dissipation before contacting factories for quotes; review the available evidence before requesting comparable quotations from suitable candidates.

Updated

Suppliers List

Comprehensive Sourcing Guide

Arduino RGB LED Module Supplier Concentration and Factory Types

When you search for Arduino RGB LED Module suppliers, the results are dominated by companies based in Guangdong, China, which appears as the listed origin for multiple manufacturers in this category. Guangdong's role is consistent with the product evidence itself: several listed modules carry a stated origin of Guangdong, China, and the product catalogues of these companies centre on LED modules, LED signs, LED pixel lights, custom neon signs and illuminated signage. This tells you that the region functions as an active manufacturing base for addressable and RGB module products rather than a incidental listing location. Treat it as a signal worth using: if you shortlist suppliers from this province, you are sourcing from the same cluster where the listed products are made.

Supplier types vary meaningfully. Some listings are pure manufacturers, whose main products include LED tubes, LED panels, flood lights, street lights, highbay lights, LED modules, COB LEDs, corn bulbs and explosion-proof lights — a broad industrial lighting range with modules as one line. Others are listed as manufacturer and trading company combined, focused more tightly on LED modules, LED signs, LED pixel lights and custom neon signs. This distinction matters because a trading-heavy profile may broker production it does not control, while a module-focused manufacturer is more likely to own the injection moulding and SMD assembly relevant to your build. Filter by company type and main-product fit before anything else.

How to Verify Arduino RGB LED Module Suppliers

Verification should begin with third-party evidence rather than self-declared claims. At least one supplier in this category holds ISO 9001 certification alongside EMC, CE and a Declaration of Conformity, and one is verified through TÜV Rheinland — credentials you can ask to see as certificates with validity dates. Where certification is displayed, confirm the certificate number and scope cover LED modules specifically, not the broader company umbrella. Where a listing shows no system certification, do not assume the supplier lacks one or has one; ask directly for documentation and treat an unanswered request as a screening result in itself. Product-level claims also deserve verification, such as the listed certifications of UL, ETL, FCC, CE, UKCA and RoHS on one module, which should be matched to actual test reports for the exact model number.

Beyond paperwork, verify capability through the product data itself. Several listed modules share telltale engineering details: SMD5050 or SMD2835 chips, 12V DC input, IP65 or IP68 waterproofing, 120- or 160-degree viewing angles, and 50,000-hour rated lifespans. A supplier whose listings are internally consistent — model numbers, packaging dimensions, operating temperature ranges — is easier to audit than one with fragmented data. Confirm that customization is genuinely available, as several listings state it is, by requesting a sample with your specified chip, lens or wiring. Finally, verify the supplier can reproduce the claimed performance: ask how the 0.72W or 1.2W power figures and color rendering values were measured, and whether independent lab results exist.

What to Compare Across Arduino RGB LED Module Suppliers

Build a comparison sheet from attributes suppliers actually display, without assuming every supplier publishes every value. Quoted response times in this category range from around 4 hours to roughly 5.6 hours, which is a usable first filter for communication speed on a product where engineering questions — chip selection, controller compatibility, wiring — dominate early conversations. Lead time appears on some listings, such as a stated 7 days; others show no lead time value at all, so record "not disclosed" rather than guessing and ask each shortlisted supplier to confirm production and sampling timelines in writing. MOQs differ sharply across the category: one RGB module lists an MOQ of 1, another 20, another 100, which changes your sampling and pilot-order economics dramatically.

Price and specification belong in the same comparison row. Listed unit prices for RGB modules span roughly 0.11 to 0.28 USD depending on chip count, power and waterproofing, so normalize quotes against the stated specifications — 0.3–0.5W per LED, IP rating, viewing angle, and operating temperature range. Also compare scope: a manufacturer whose main products include LED modules, signs and pixel lights may support your signage integration, while a general lighting manufacturer may be better on industrial volumes. Compare location, since Guangdong-based suppliers may consolidate freight more easily, and compare company type, since manufacturer-trading hybrids carry different accountability than pure factories.

Common Arduino RGB LED Module Sourcing Risks

The most frequent risk in this category is specification drift between the listing and the shipped goods. One listing's IP rating field literally reads "IPLED Chips:Samsung," indicating the data fields are hand-merged and error-prone; another mixes an IP rating field with a chip brand. If you order from listing text alone, you may receive a different chip or waterproofing grade than shown. Mitigate this by requiring a signed specification sheet stating chip type (SMD5050, SMD2835 or equivalent), input voltage, IP rating, viewing angle and operating temperature range, then verifying against first-article samples before mass production.

A second risk cluster concerns certification and compatibility. Arduino integration depends on addressable control protocols, yet several listings describe RGB or RGBIC color behavior without stating the controller IC or data protocol; a module sold as "RGB" may not be individually addressable, and an "Rgbic" designation is not itself a compatibility guarantee. Clarify in writing whether the module is addressable per-pixel or per-segment, and which Arduino libraries or drivers it is known to work with. Certification risk follows: a module listing may claim UL, ETL, FCC, CE, UKCA or RoHS, but if your destination market requires specific marks, confirm the certificate applies to your exact model. Finally, warranty and lifespan claims — 3-year warranties and 50,000-hour ratings appear on some listings — should be tied to a written warranty term covering LED decay and waterproofing failures.

Arduino RGB LED Module Regional Sourcing and Logistics

Guangdong's concentration of listed module manufacturers simplifies logistics planning in concrete ways. Modules are small and dense: one listing describes a 74.0×15.5×5.8mm module, another 94.5×17×5.6mm, with carton standards around 48–50cm per side. That means a modest pilot order of a few hundred units weighs very little, making air freight or express courier viable for samples and first runs, while sea freight becomes economical only at carton-pallet volumes. Sourcing from a single province also lets one consolidated shipment cover multiple suppliers if you split a module order from a signage or pixel-light order, reducing freight fragmentation.

When cluster data is not displayed for a given supplier, identify geography from the listing itself rather than assumption: check the stated product origin field, which several module listings show as Guangdong, China. Beyond origin, probe the operational logistics that determine delivery reliability. Ask each supplier how the stated lead time — where one exists, such as 7 days — scales with your quantity, since a short quoted lead time may apply only to stock configurations, not custom injection colors or chip variants. Confirm packing formats: one listing specifies 100 pieces per inner box, another 200 pieces, and carton dimension standards are listed on several products. Precise packing data matters for retail-ready or kitted shipments. Finally, ask whether the supplier ships ex-works, FOB or door-to-door, and whether they consolidate with the waterproofing accessories and controllers your Arduino setup requires.

Arduino RGB LED Module Commercial Terms and Order Planning

Order planning in this category should exploit the unusually low MOQs. With listed minimums of 1, 20 and 100 units and unit prices from roughly 0.11 to 0.28 USD, you can afford a staged plan: a one-piece engineering sample to validate Arduino addressability and protocol behavior, a 20-to-100-piece pilot to check binning consistency, waterproofing and color uniformity across batches, then volume pricing negotiated against a confirmed specification. Ask suppliers how unit price moves at 500, 1,000 and 5,000 units, since the listed price bands are narrow and volume discounts may hinge on chip sourcing rather than assembly.

Commercial terms should be captured before payment, not after. Confirm in writing: the exact model number (several listings cite models such as MC21RGBIC, M281, QC-M208RGB and MC208RGB), the applicable warranty — a 3-year term appears on at least one module — the payment instrument, and whether escrow or platform-backed trade protection applies to your transaction, since some suppliers operate under programs that offer such coverage and others do not. Because customization is listed as available on multiple products, define acceptance criteria for custom runs: color calibration, IP testing method, and packaging per the stated carton standards. Finally, build a re-order clause: modules for signage and lighting projects run for years, so secure the supplier's commitment to chip continuity and lead-time confirmation on repeat orders before your first payment clears.

Word count check: each section ~230 words; total approximately 1,380.

FAQs

What is the price range for RGB LED modules?

Prices for RGB LED modules range from 0.11 to 0.28 USD per unit depending on the specific model and specifications. Some models start at 0.11 USD while others reach up to 0.28 USD. Buyers should check individual product listings for exact pricing details.

What are the minimum order quantities for these modules?

Minimum order quantities vary significantly between different suppliers and product models. Some listings require a minimum of 20 units, while others allow orders as low as 1 unit. Buyers must verify the specific MOQ for each product they intend to purchase.

Are these LED modules waterproof for outdoor use?

Yes, many RGB LED modules listed are waterproof and suitable for outdoor applications. Specific products feature IP65 or IP68 ratings to ensure protection against water ingress. Buyers should confirm the exact IP rating required for their specific installation environment.

What is the typical response time for suppliers?

Suppliers in this category typically respond within 4 to 5.56 hours. This quick response time helps buyers get timely quotes and technical support. Buyers can expect efficient communication when contacting manufacturers or trading companies for their LED module needs.

Do suppliers offer customization for LED modules?

Customization is available for many RGB LED module products listed. Buyers can request specific sizes, colors, or packaging options to meet their project requirements. It is advisable to discuss customization details directly with the supplier before placing an order.

What certifications do these LED modules have?

Certifications include UL, ETL, FCC, CE, UKCA, and RoHS for various LED module products. Some suppliers also hold ISO 9001 and EMC certifications. Buyers should verify that the specific product meets the regulatory standards required for their target market.

Where are these LED modules manufactured?

These LED modules are manufactured in Guangdong, China. The origin is consistently listed as Guangdong for the products available. Buyers sourcing from this region can expect established manufacturing capabilities for LED lighting components.