Lady Cigarette Case Suppliers and Manufacturers Directory

Browse 24 Lady Cigarette Case suppliers and compare them by location, minimum order quantity, lead time, product capacity, and logo customization support. Review verified product specifications from Zhejiang-based trading companies, then contact shortlisted manufacturers directly to request quotations and confirm ordering details before committing.

Suppliers List

Comprehensive Sourcing Guide

Lady Cigarette Case Supplier Concentration and Factory Types

Buyers searching for a Lady Cigarette Case will encounter two broad supplier types: manufacturers that produce cases in-house and trading companies that consolidate output from nearby workshops. In the current supplier results, Zhejiang, China appears as the listed location, and at least one listed supplier identifies itself as a trading company handling toothbrushes, hookahs, lighters, molasses and rolling trays alongside cigarette cases. That product mix is a useful signal: when cigarette cases sit inside a multi-category catalogue rather than as a core line, the seller is more likely reselling than molding, printing or assembling the cases itself. Neither structure is inherently better, but the two types fail differently, and buyers should know which failure mode they are exposed to before committing.

Manufacturers typically control tooling, surface finishing and capacity, so they can answer questions about wall thickness, hinge durability and coating adhesion directly. Trading companies offer breadth and can bundle cases with lighters or trays, which suits buyers assembling a full smoking-accessory assortment, but they add a layer between you and the actual producer. Ask every candidate which activities they perform themselves and which are subcontracted. If a supplier lists main products far outside smoking accessories, request photos of the specific production lines handling your case model, not just catalog images of finished goods.

How to Verify Lady Cigarette Case Suppliers

Verification starts with the gap between what a profile claims and what product evidence shows. The listed results provide concrete attributes you can cross-check: model numbers such as PC001, CH-001CC and YH010; stated capacities of 20 pieces per case; materials declared as metal, plastic or acrylic; and packaging details describing carton quantities. A genuine supplier should be able to produce the same model number, capacity and material when you ask for a specification sheet or sample. If the product page says metal with a membrane-covered finish and the sample arrives as bare painted plastic, that mismatch tells you the listing was recycled or the supplier is brokering someone else's stock.

Next, verify capacity claims against order history. One listed product states supply ability of 10,000 cartons per week; another states 100,000 pieces per month. These are marketing figures until proven. Ask for evidence of recent shipments of comparable quantity, and confirm whether the stated place of origin — Zhejiang, China in several listings — matches where goods would actually ship from. Check logo capabilities too: laser carving, silkscreen printing and offset printing are each claimed in the results, and each requires different equipment. A supplier claiming all three on one profile deserves a sample with your actual artwork. Finally, verify responsiveness in practice: one listed supplier shows a response time of 5 hours, which you should treat as a baseline to test yourself with a technical question rather than a greeting.

What to Compare Across Lady Cigarette Case Suppliers

Build a comparison sheet using the dimensions actually displayed on supplier profiles, and record where a dimension is missing rather than assuming it is absent. Useful columns include location, supplier type (manufacturer versus trading company), main products, response time, lead time, establishment year and whether escrow or platform-protected payment is offered. In the current results, Zhejiang, China is the listed location, one supplier is labeled a trading company, a response time of 5 hours appears, and one profile shows a lead time entry of 0, which you should read as "not populated" and confirm directly. Establishment year and escrow status may not be shown for every supplier, so note those as fields to request.

Then layer product-level comparisons on top. Minimum order quantities in the results range from 50 pieces on a metal cigarette case lighter combination, to 100 pieces on an acrylic glitter case, to 500 pieces on a plastic pocket case. Unit prices span roughly $0.60–$0.98 on the acrylic model, $0.72–$0.98 on the metal lighter case, and $1.13–$1.44 on the plastic pocket case. Compare like with like: a 20-piece metal case and a 20-piece acrylic case are not substitutes even at similar prices. Weigh supply ability (10,000 cartons per week versus 100,000 pieces per month) against your reorder volume, and note each listing's logo method, since finishing choice affects both cost and durability.

Common Lady Cigarette Case Sourcing Risks

The most frequent risk in this category is specification drift between listing and delivered goods. Product pages in the results carry conflicting labels: one entry is titled as a plastic pink case yet its attributes name it a "Metal Cigarette Case"; another describes metal with a covered membrane finish while a sibling listing uses acrylic with a painted surface. When a supplier cannot keep material declarations consistent on their own listings, you must pin down material, weight (listings show 63g, 70g and 0.04–0.100 kg gross weights) and finish in a signed specification sheet before production. Ambiguity here becomes a dispute later, because "pink glitter" and "painted pink" are commercially different products.

The second cluster of risks involves capacity and lead-time assumptions. A stated supply ability of 10,000 cartons per week is not a promise about your order; the same profile also shows a lead-time field of 0, meaning no real commitment exists on the listing. Buyers who assume quoted capacity equals reserved capacity often face delays during peak season. Third, trading-company intermediaries can obscure who actually holds your tooling — if your custom logo is applied by a subcontractor, ask who owns the artwork files and plates. Finally, trademark risk: several listed products carry a brand name, so confirm your logo does not infringe registered marks in destination markets before silkscreen or laser work begins.

Lady Cigarette Case Regional Sourcing and Logistics

The supplier results place the sourcing base in Zhejiang, China, which buyers should treat as the stated origin for this assortment of cases, lighters and smoking accessories. Zhejiang's coastal position matters operationally because the listed products name concrete dispatch ports: Ningbo, Shanghai and Yiwu. Those port options give you leverage on freight planning — Ningbo and Shanghai serve full-container and consolidated ocean shipments, while Yiwu is closely associated with small-commodity consolidation, which suits case volumes that fall below a full container. When comparing suppliers, confirm which dispatch port each one actually uses; a supplier two provinces away from its claimed port will hand you longer inland trucking costs and Schedule B risk.

Plan logistics around the physical facts in the listings. Single package sizes run from roughly 9.2×2.8×6 cm for the acrylic pocket case to 15×6.5×3 cm for the metal lighter case, and one plastic model packs 200 pieces per carton. These dimensions determine how many cases fit a carton and, ultimately, your per-unit freight cost, so ask suppliers for real carton dimensions and stacked pallet configurations rather than trusting single-item data. For samples, air courier from the Zhejiang region is routine; for production, decide early between sea freight economics and air speed. Confirm whether quoting is FOB at the named port or includes inland legs, and get the dispatch port written into the proforma invoice.

Lady Cigarette Case Commercial Terms and Order Planning

Commercial terms in this category are visible enough to plan around. Listed minimum order quantities are 50 pieces (metal case with integrated lighter), 100 pieces (acrylic glitter case) and 500 pieces (plastic pocket case), with indicative unit prices of roughly $0.72–$0.98, $0.60–$0.86 and $1.13–$1.44 respectively. Payment methods shown include T/T and Western Union on one listing. Use the low MOQ entries to run sample-and-market tests before scaling: a 50- or 100-piece trial order lets you validate finishing quality — laser carving, silkscreen or offset logo work — and packaging without heavy exposure. Confirm whether quoted prices are per piece or per case, and whether they hold at your target quantity or only at the listed MOQ.

Order planning should sequence pilot, inspection and repeat orders. Start with a paid sample against the exact model number (PC001, CH-001CC, YH010 in current listings), then place a first production run at or near MOQ with pre-shipment inspection written in. Because lead-time data on the profiles is incomplete — one entry shows 0 — negotiate a written lead time from deposit to dispatch, and tie it to the named port of dispatch. Budget reorders around stated supply ability rather than requesting impossible turnarounds, and confirm logo files, color codes (listings reference multiple colorways from black to pink glitter) and carton marking requirements in the purchase order so repeat orders need no renegotiation.

(Word counts per section: ~230, ~231, ~232, ~231, ~230, ~231; total ~1385 words.)

FAQs

What is the minimum order quantity for lady cigarette cases?

The minimum order quantity varies by product type. Metal cases typically require 50 pieces, while acrylic options may need 100 pieces. Some plastic models have a higher threshold of 500 pieces. Buyers should check specific product listings to confirm the exact MOQ before placing an order.

How much does a Lady Cigarette Case cost?

Prices range from approximately $0.60 to $1.44 per unit. Basic acrylic or plastic cases are generally more affordable, starting around $0.60. Metal or leather-style cases with custom logos cost more, reaching up to $1.44. Volume discounts often apply for larger orders.

Can I customize the logo on these cigarette cases?

Yes, most suppliers offer OEM logo customization. Common methods include laser carving for metal cases and silkscreen printing for plastic or acrylic options. Buyers can request offset printing for leather-style cases. Customization allows for brand visibility and is suitable for gifts or promotional items.

Where are these cigarette cases manufactured?

These products are primarily manufactured in Zhejiang, China. Some listings also indicate general origins within China. The region is known for producing various smoking accessories and storage boxes. Buyers can verify specific factory locations in the product details or by contacting the supplier directly.

What materials are used for lady cigarette cases?

Common materials include metal, plastic, acrylic, and PU leather. Metal cases offer durability and a premium feel. Plastic and acrylic options are lightweight and often feature colorful designs like glitter or clear finishes. Buyers should select materials based on their preferred aesthetic and functional requirements.

How quickly can suppliers ship these orders?

Response times are typically around 5 hours. Supply abilities range from 10,000 cartons per week to 100,000 pieces per month. Lead times depend on order size and customization needs. Buyers should confirm specific delivery schedules with the supplier to ensure timely receipt of goods.