Class II SpO2 Sensor Probe Suppliers and Manufacturers

Explore 26 verified options for Class II SpO2 Sensor Probe from Guangdong and Jiangsu factories. Compare response times, lead times, certifications like CE and ISO13485, and pricing ranges. Contact suppliers directly to request quotes for compatible models; review the available evidence before requesting comparable quotations from suitable candidates.

Suppliers List

Comprehensive Sourcing Guide

Class II SpO2 Sensor Probe Supplier Concentration and Factory Types

Buyers searching for a Class II SpO2 Sensor Probe will encounter a supplier base concentrated in China, with several of the suppliers in current results located in Guangdong province and at least one in Jiangsu. Guangdong appears repeatedly across the listings, both for dedicated cable-and-probe manufacturers and for broader medical accessory makers, which suggests it functions as an active cluster for this category. Jiangsu appears through a trading company whose main products span ultrasound, X-ray, dental, and sterilization equipment, showing that probe suppliers in the region are not exclusively specialists. Because listings change, buyers should treat location data as a starting filter rather than a permanent market map.

Supplier types in this category split into three recognizable profiles. The first is the focused manufacturer whose main products list SpO2 sensors, ECG and EKG cables, NIBP cuffs, and adapter cables — a profile that signals in-house production of compatible probes. The second is the combined manufacturer-distributor, which may produce some lines and resell others, so buyers should ask which items are made in-house. The third is the trading company with a wide equipment catalog and ODM, OEM, and own-brand capacity declarations; these can be useful for bundled orders but add a layer between buyer and factory. Verifying which profile a supplier truly matches is the practical first step before deeper technical discussion.

(226 words)

How to Verify Class II SpO2 Sensor Probe Suppliers

Verification starts with documentation rather than conversation. In current results, listed system certifications vary — one Guangdong supplier shows MDD, while the Jiangsu trading company shows a category recorded as "Others" alongside a third-party verification badge — so buyers cannot assume a uniform compliance baseline across the category. At product level, several listings cite CE and ISO13485 certificates, Class II instrument classification, and specific safety standards, but a certificate claim in a listing is not proof. Request the actual certificate documents, check the certificate numbers against the issuing body's database where possible, and confirm the certificate holder name matches the legal entity you are contracting with.

Second, verify production reality. For suppliers presenting themselves as manufacturers of SpO2 sensors and compatible probes, ask for a factory audit report or offer to commission one, and request photographs or a live video walk-through of the probe assembly and connector-soldering lines. Ask which components are sourced externally — several listings reference Korean-sourced LED/photodiode components — and require traceability for those parts. For trading companies, ask explicitly which factories supply the probes and whether you may communicate with them on technical matters. Finally, test responsiveness under realistic conditions: one listed supplier reports a response time around four hours and another under three hours, but response speed during your inquiry phase is the data point you can measure yourself, so record it for every supplier contacted.

(228 words)

What to Compare Across Class II SpO2 Sensor Probe Suppliers

Build a comparison sheet using only the attributes actually displayed per supplier, because not every supplier publishes the same fields. Useful dimensions from current results include location (Guangdong versus Jiangsu), company type (manufacturer, manufacturer-distributor, trading company), main products, declared system certification, third-party verification status, response time, and lead time. Lead times vary meaningfully in the data — one supplier lists five days and another fifteen — so normalize this field before ranking. Note that response time and lead time shown on a platform are typically averages or best-case figures; confirm both in writing for your specific probe model and order volume.

Product-level comparison matters more than supplier-level labels for a Class II probe. Compare the listed technical attributes side by side: cable length (3.0 meters appears repeatedly), connector pin count (14-pin, 12-pin, 9-pin, 6-pin, and 5-pin configurations all appear across listings), connector material (nylon with gold-plated copper pins is cited in several listings), cable material (TPU), shelf life (one year on some probes, twenty-four months on another), and warranty (twelve months on at least one listing). Price ranges differ by compatibility target and configuration — one listing spans roughly ten to fourteen dollars, another fifteen-plus dollars — so always compare like-for-like connector types and patient sizes. MOQ also varies: some listings show a minimum order of a single unit while others do not display one, so request written confirmation where it is absent.

(231 words)

Common Class II SpO2 Sensor Probe Sourcing Risks

The dominant risk in this category is compatibility failure. Many listings are branded "Compatible for" specific monitor brands, and a probe built for a 14-pin connector will not work on a 12-pin monitor regardless of price. Risks compound when buyers order by keyword rather than by model number — several listings carry distinct model numbers such as BSC314-27D or BSA312-19, and these should anchor your purchase order. Request a sample tested on your actual monitor model before any bulk commitment, and document the exact device firmware or generation, since connector layout can vary even within a brand's product family.

Compliance and consistency risks follow closely. Because Class II classification appears across listings, verify that the certificate offered covers the specific probe configuration you are buying, not a different product in the supplier's range. Shelf-life claims of one year versus twenty-four months suggest differing storage, packaging, or material practices; ask how shelf life is validated and how probes are packed for freight. Quality drift between sample and production runs is a known problem with consumable-style accessories, so define acceptance criteria — connector fit, cable strain relief, signal acquisition on your monitor — and put them in the purchase contract. Finally, avoid over-relying on any single displayed credential such as a verification badge; it confirms identity checks, not product quality, and should complement rather than replace your own technical validation.

(227 words)

Class II SpO2 Sensor Probe Regional Sourcing and Logistics

The confirmed geography in current results is southern and eastern China: Guangdong appears across multiple manufacturer and manufacturer-distributor listings, while Jiangsu appears through a trading company with a fifteen-day lead time versus five days reported by a Guangdong supplier. For a buyer, this geography matters for two reasons. First, Guangdong's concentration of SpO2 sensor, ECG cable, and NIBP cuff suppliers means you can potentially consolidate multiple patient-monitoring accessories from nearby factories, reducing freight fragmentation. Second, proximity of suppliers within one cluster makes it practical to visit several factories in a single trip, which is one of the most efficient verification methods available for this category.

Logistics planning should account for product characteristics. A single packed probe is small and light — one listing shows a 5 x 10 x 2 cm package at 0.130 kg gross — so air freight is economically viable for samples and small urgent orders, while sea freight suits bulk replenishment. Probes are Class II medical accessories, so confirm with your customs broker whether your destination market requires any import registration or accompanying documentation beyond the commercial invoice, and ask suppliers to include packing lists that match certificate references. Lead-time comparisons should include production plus transit: a five-day production lead time paired with air freight can outperform a fifteen-day lead time in total delivery terms, so evaluate the combined timeline rather than the supplier's headline figure alone.

(231 words)

Class II SpO2 Sensor Probe Commercial Terms and Order Planning

Commercial structuring should follow the category's ordering realities. Several listings show low or single-unit MOQs — one probe lists an MOQ of one — which makes sampling inexpensive, so structure your engagement as a sample order, a pilot batch, and then recurring volume, with acceptance criteria fixed before the pilot. One Guangdong supplier shows in-stock status on certain probe models, which shortens effective delivery beyond the five-day lead time; ask each supplier which compatible models they hold in stock versus produce to order, since this distinction drives your replenishment planning. For customization needs, the trading-company profile in the results declares customization availability, so route OEM or ODM inquiries there after confirming the underlying factory.

Payment and pricing terms deserve explicit attention. Price ranges in current results run from roughly ten to eighteen dollars depending on probe type and compatibility target, and single-listing prices sometimes show no range at all — treat displayed prices as indicative only and request a formal quotation for your exact model, quantity, and Incoterms. Prefer payment structures that tie funds to verified milestones: a deposit before production, balance after pre-shipment inspection against your acceptance criteria. If a platform offers escrow-style protection, factor it in, but do not assume all suppliers on this page offer identical terms; confirm per supplier. Finally, lock warranty terms in the contract — twelve months appears in at least one listing — including the remedy process for defective probes discovered on arrival.

(229 words)

FAQs

What does Class II classification mean for an SpO2 sensor probe?

Class II indicates the probe falls into a moderate-risk medical device category requiring regulatory controls before market sale. For buyers, it means the sensor should carry documentation such as CE marking or ISO13485 certification. Always request the certificate copies and confirm which authority issued them before placing an order.

What is the typical price range for a compatible SpO2 sensor probe?

Compatible reusable probes commonly list between roughly 10 and 18 US dollars per unit depending on connector type and patient size. Adult finger clip models and neonatal wrap styles sit at different points in that range. Final pricing usually improves with larger order quantities, so request quotations for your specific volume.

Can I order an SpO2 sensor probe with a low minimum order quantity?

Yes, some listings allow a minimum order quantity of just one unit, which suits testing or evaluation purchases. Small trial orders let you verify connector compatibility and cable quality before committing to volume. Confirm that sample pricing, shipping cost, and lead time are stated clearly before you confirm the trial order.

How long does production and delivery take for SpO2 sensor probes?

Lead times in current supplier results range from about 5 days to 15 days depending on the supplier and order size. Suppliers with stock available may ship faster than those producing to order. Ask each supplier to confirm the lead time for your quantity and destination before finalizing the purchase contract.

Which SpO2 probe connectors and monitor brands are commonly supported?

Listings in the current results cover connectors such as 14-pin, 12-pin, 9-pin, and 6-pin configurations for adult, child, and neonatal applications. Compatible probes reference monitor brands including Dolphin, Nonin, Medetec, and Contec Surgitech. Match the pin count, notch style, and degree angle to your monitor model before ordering.

What specifications should I verify before buying an SpO2 sensor probe?

Check cable length, which commonly runs about 3 meters, cable material such as TPU, connector pin count, and shelf life. Also confirm warranty terms, as some listings state 12 months of coverage. Request the CE and ISO13485 certificates, sample units, and photos of the actual connector to confirm compatibility with your monitors.

Where are most Class II SpO2 Sensor Probe suppliers located?

The suppliers represented in current results are located in Guangdong and Jiangsu provinces in China, both established hubs for medical consumables manufacturing. Guangdong suppliers in particular list SpO2 sensors, ECG cables, and NIBP cuffs as main products. Consider location alongside response speed and lead time when shortlisting.